High end 4-in-8-out matrix digital audio processor.

It has the functions of equalization, compression, amplitude limiting, delay, feedback suppression, gain control, matrix, LED indication, noise gate, authority management and remote control.

The fourth generation SHARC adsp-2148x 400MHz floating-point DSP is used, which has powerful DSP processing and operation ability.

Each input and output has 16 segment parameter filter, gain control, noise gate function, RMS voltage limit, built-in Pink / white noise generator and adjustable delay. The frequency divider slope can be selected from 6dB / OCT to 48dB / Oct.

The delay step accuracy is 0.02ms and the level gain accuracy is 0.1dbu, which meets the on-site fine adjustment.

48Khz / 96KHz sampling frequency, high sound quality restoration, ultra-high signal-to-noise ratio and very low distortion.

Three RJ45 network transmission control interfaces are provided.

The device supports control cascading.

It has the functions of temperature, resource occupation, working status and operation big data network monitoring.

232 control port is connected with special control software and central control system.

The panel can operate the adjustment equipment independently.

Adsp-21488 400MHz floating point DSP (48K model)

Adsp-21489 400MHz floating point DSP (96k model)

With dynamic equalization, fir equalizer and all pass filter module (96k model)

Dynamic range 114dbu

Input 16 segment PEQ and output 16 segment PEQ

100M Ethernet interface

PC software automatic search processor

32 system presets

Fast copy of channel parameters

DSP and arm firmware can be upgraded through Ethernet