2×1050W two-channel digital network amplifier;

With TCP, GPIO, UDP, USB, RS232, RS485 control, including two groups of GPIO module control interface;

Two power output with constant pressure and constant impedance model, can be a key seamless switching;

With analog signal, AES digital signal, Dante signal three input, signal can be automatically switched, to achieve any signal hot backup function;

The device supports TCP/UDP network remote control, running status monitoring, data operation and maintenance, and remote debugging.

True color 4.3-inch touch control screen, supporting double backup debugging function of buttons and touch screen;

Support wireless debugging function;

Support the computer, tablet, mobile terminal equipment management control;

Centralized control of single equipment and multi-equipment group can be realized by computer master software.

Support control protocol control;

Including 2 incoming and 2 out DSP processors, each channel temperature, power, voltage, current monitoring;

Through the computer, it can realize the function of time sequence switching machine with adjustable time interval between multiple devices.

You can change the device name and IP address through the computer.

Supports serial port RS485 access.

Signal source support analog signal input, sine wave signal input, pink noise input, white noise input, Dante digital audio signal input (optional module), AES digital audio signal input;

Input sensitivity: 0dB, 6dB, 12dB optional;

Input gain: -60-+15dB optional;

Input channel support phase optional;

Input channel supports mute function;

Input channel support noise gate adjustable;

The input channel supports 31-segment PEQ adjustable BYPASS, high and low pass filter, and copy-paste reset function.

Input channel support delay adjustable;

Input and output channels support matrix function, can arbitrarily choose multi-channel input, multi-channel output;

Input channel can be arbitrarily sent to the 2-channel FIR filter output;

The output channel can be arbitrarily sent to two FIR filter input;

Output channel supports 10-segment PEQ adjustable, BYPASS, high and low pass filter, and copy-paste reset function;

Output channel support delay adjustable;

Output channel support compressor adjustable;

Output channel support limiter adjustable;

Output gain: -60-+15dB optional;

Support 80 scene mode;

Support simplified Chinese, Traditional Chinese, English three languages;

power: 8 Ω /2 x 1050 w, 4 Ω /2 x 1575 w

Bridge single channel: 1 x 2100W

Constant voltage output: 2×1050W

Input connector: XLR female

Input impedance: 20 k Ω balance

Input common-state rejection ratio: >80dB

Output connector: Speakon seat

SNR: >110dB

Damping coefficient: > 1000 @ 8 Ω

Total harmonic distortion: <0.1%(20 HZ-20 kHz 1W)

Frequency response: 20Hz-20KHz(+0/-0.3dB,1W/8Ω)

Cooling mode: stepless speed regulating fan, airflow from front to back

Power amplifier protection mode: short circuit, open circuit, DC voltage, overheat, overvoltage, rf, ultra-low frequency protection

Power supply specification: AC voltage 180-240V 50-60Hz

Dimensions (h x w x d) : 88mmX440mmX370mm